Whole-home duct cleaning
Dryer vent cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Why Kent Homeowners Choose Carrier Air Duct Cleaning
We provide independent Carrier air duct cleaning, coil cleaning, blower cleaning, and duct sealing for homes across Kent, WA. What sets our Carrier work apart is that we treat the duct system, the air handler, and the coil as one connected system – not three separate jobs done by whoever happens to show up. We are an independent Carrier service provider, not affiliated with or authorized by the manufacturer, and our technicians have up to 15 years of experience with Carrier equipment in western Washington.

Carrier systems show up in Kent in every form the brand makes: Infinity, Performance, Comfort, and WeatherMaker. Each behaves a little differently when its ductwork starts to fail, and knowing those differences is the whole point of hiring a Carrier-focused provider. We use Rotobrush rotary-brush equipment, Nikro vacuum and collection gear, and Abatement Technologies air scrubbers on every job. Call (866) 761-6504 for a free estimate.
Why Trust Duct Cleaning Kent for Your Carrier Air Duct Cleaning?
Carrier equipment rewards technicians who understand its airflow design. The Infinity Series variable-speed air handlers move air differently than a fixed-speed unit, and a dirty blower wheel throws off that balance before you’d notice a problem on a simpler system. We know what a fouled Infinity blower feels like in the house: rooms that never quite cool, a system that runs longer, and a utility bill that creeps up. Performance Series evaporator coils are another recurring issue in Kent’s damp climate, and we know how to check for the mold growth that causes musty odors without disturbing the coil surface.
When parts are needed, we use quality parts that fit Carrier equipment. Critical components like blower motors and coils get OEM parts to keep compatibility exact. Duct sealing and insulation work can use high-quality aftermarket materials because the duct shell doesn’t care who made the mastic. Services stay warranty-safe: nothing we do to your ductwork or coil should put your Carrier coverage at risk, and we’ll tell you plainly if a recommendation might. We’re not factory-trained or certified by Carrier. We’re an independent provider that has learned Carrier systems from the inside, across Kent and the Pacific Northwest.
Styles & brands we work with
- Whole-home duct cleaning
- Dryer vent cleaning
- Camera inspection
- Sanitizing & deodorizing
Common Carrier Air Duct Cleaning Problems We Fix in Kent
The failure modes below are the ones we see most in Kent homes, and they’re specific to how Carrier equipment is built and how this valley’s climate treats it.
- Dust fouling the Infinity Series blower wheel. Variable-speed air handlers run at low speeds much of the time, so dust settles on the blower wheel rather than being flung off. Over months it builds an uneven layer that throws the wheel out of balance, which shows up as reduced airflow and a subtle hum you might mistake for normal operation. Cleaning the wheel restores the airflow the system was designed to deliver.
- Mold on Performance Series evaporator coils. The coil stays wet after every cooling cycle. In Kent’s humid, foggy winters the condensation doesn’t dry out the way it would in a drier climate, and mold takes hold on the coil fins. That’s the source of the musty smell when the AC first kicks on. Coil cleaning is the fix, and it’s one of the most common Carrier jobs we do here.
- Leaking flex duct joints on Carrier systems. Carrier flex duct connections develop leaks at the joints as temperature swings cause the material to expand and contract season after season. Every leaky joint bleeds conditioned air into a crawl space or attic, and the system runs longer to compensate. Duct sealing with mastic closes those joints properly.
- Loose seams in older Carrier metal ductwork. Homes with original galvanized steel ductwork often have Carrier systems running through unsealed metal runs. Loose seams pull attic or crawl space air straight into the supply, which drags in dust and humidity along with it. Sealing the seams stops the infiltration.
- Return ducts drawing garage air in Panther Lake and East Hill. A fair number of 1970s-era homes in these neighborhoods ran return ducts through the garage ceiling – a practice that was allowed at the time but pulls car exhaust and fumes into the home’s air supply. Sealing or rerouting those runs during a duct cleaning visit is a real safety improvement, not a cosmetic one.
Carrier Parts & Our Repair-vs-Replace Approach
We don’t keep Carrier parts in stock, and we won’t tell you we do. What we do is source the right part for your system: OEM Carrier parts for critical components like blower motors and coils, where a fraction of an inch of fit matters, and high-quality aftermarket parts for duct sealing and insulation, where the material spec is what counts. For ductwork itself, repair usually beats replacement. Loose seams, disconnected flex runs, and leaking joints are all fixable with mastic, proper fittings, and the right insulation. Replacement only makes sense when there’s major structural damage – crushed duct runs, sections that have collapsed, or ductwork so deteriorated that sealing it would be a patch on a patch.
Call (866) 761-6504 and we’ll give you an honest read on which side of that line your Carrier system is on. Estimates are free.
Our Carrier Service Process – Step by Step
- 1
Diagnosis. We start with airflow measurements, a visual inspection of the air handler, and a look at the duct runs accessible from the attic or crawl space. On a Carrier system we pay particular attention to the blower wheel and the evaporator coil, since both are common culprits in Kent’s humid climate.
- 2
Repair or install. Depending on what we find, the work might be coil cleaning, blower cleaning, duct sealing with mastic, or a combination. We set one flat price per system, agreed before work starts, so there’s no per-vent math and no surprise invoice.
- 3
Test. After the work, we re-check airflow and confirm the sealed joints hold. Before-and-after photos of your own ducts go to you so you can see exactly what changed.
- 4
Warranty-safe handoff. We explain what we did, what we recommend watching, and how the work interacts with your Carrier coverage. Nothing we touch should put your warranty at risk.
See the difference
Before
After
Before
After
Before
AfterCarrier Products We Service & Install in Kent
We service Carrier Infinity Series, Performance Series, Comfort Series, and WeatherMaker systems across Kent, including variable-speed air handlers, evaporator coils, and the ductwork connected to all of them. That covers the full range of Carrier equipment a Kent homeowner is likely to have: high-efficiency variable-speed setups, mid-range single-stage systems, and older WeatherMaker units still running fine in homes that have never been retrofitted. Whether your Carrier system lives in a 1960s East Hill ranch or a newer Panther Lake townhome, the duct design differs but the diagnostic approach is the same: measure airflow, find the restriction, fix it at the source.

We Also Service These Brands
We’re Carrier-focused, but we’re not Carrier-only. Duct Cleaning Kent also services Lennox and Trane systems, so if your home has mixed-brand equipment – a Carrier air handler paired with a Lennox condenser, or a Trane system in a rental property – we can handle the duct side without you needing two providers. Multi-brand capability means one phone call covers the whole system.
FAQs – Carrier Air Duct Cleaning Service in Kent
No. We are an independent Carrier service provider, not affiliated with or authorized by the manufacturer. Our expertise comes from hands-on experience with Carrier equipment in Kent and the Pacific Northwest, not from any manufacturer certification. If you need warranty service through Carrier directly, that’s a separate path.
Yes. We use OEM Carrier parts for critical components like blower motors and coils so compatibility is exact, and high-quality aftermarket parts for duct sealing and insulation work where the material spec matters more than the brand.
Most residential Carrier duct cleaning visits run a few hours, depending on system size and how accessible the duct runs are from the attic or crawl space. Duct sealing jobs may run longer if there are multiple leaky joints to close. We’ll give you a realistic time window with the estimate, not a guess.
We cover Carrier Infinity Series, Performance Series, Comfort Series, and WeatherMaker systems, along with the ductwork that connects to them. That includes variable-speed air handlers, evaporator coils, and the full supply-and-return run. Call (866) 761-6504 if you’re not sure which Carrier system you have – we can help you identify it.
Our work is warranty-safe: duct cleaning, duct sealing, and coil cleaning don’t require Carrier authorization and shouldn’t affect your coverage. Critical component replacements use OEM parts. If a recommendation could touch your warranty, we’ll tell you before any work begins.
Most Carrier duct cleaning jobs in Kent run in the range of a few hundred dollars for a standard system, and more when duct sealing, coil cleaning, or blower cleaning is added. We charge one flat price per system, agreed before work starts, with before-and-after photos of your own ducts. Call (866) 761-6504 for an exact quote – estimates are free.
Book Your Carrier Service in Kent, WA
If your Carrier system is showing low airflow, musty odors on startup, or energy bills that keep climbing, the ductwork is often the reason. We clean it. We fix it if it’s broken. Call (866) 761-6504 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Duct Cleaning Kent.