Whole-home duct cleaning
Dryer vent cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Trusted Air Duct Cleaning for Kent Homeowners
Most Kent homes have ducts that haven’t been opened in years, and the symptoms show up slowly: dust settling on furniture hours after you clean, a musty smell when the furnace kicks on, allergy complaints that don’t ease up indoors. Our technicians have up to 15 years of experience working with professional-grade equipment, not improvised tools, and we use the same rotary-brush and vacuum systems that certified restoration contractors rely on. We clean it, and we fix it if it’s broken. For a free estimate, call (866) 761-6504. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Air Duct Cleaning Services
Air Duct Cleaning Services address the whole duct system: supply runs, return trunks, registers, and the plenum at the air handler. You need this work when a home has just been renovated, when a new owner takes over a house with unknown maintenance history, when dust rebuilds fast after cleaning, or when musty odors travel from room to room with the HVAC cycle. We run a truck-grade negative-air setup while brushes work each run, so loosened debris goes into a collection unit instead of back into your living room. Duct Cleaning Kent handles whole-system cleaning, dryer vents, and duct repair under one provider. Typical whole-home cleaning runs $350 to $700 depending on the number of runs and accessibility; the written estimate sets the final price.
Whole-System Cleaning and Debris Extraction
Rotobrush rotary-brush systems and Nikro collection equipment pull built-up debris from each run, and an Abatement Technologies scrubber keeps particulate out of the air while we work. Every run gets brushed, then vacuumed, not the other way around. Ducts are only as clean as the process used to clean them.

Register and Supply Path Cleaning
Registers collect the visible layer of dust, and the supply path behind them holds the rest. We pull registers, clean the boots, and brush the run back to the trunk. That’s where a lot of the dust you notice on the furniture actually originates.

Styles & brands we work with
- Whole-home duct cleaning
- Dryer vent cleaning
- Camera inspection
- Sanitizing & deodorizing
HVAC Duct Cleaning
HVAC Duct Cleaning focuses on the parts of the system that move conditioned air under pressure: the air handler connections, the main trunk, and the return side. It matters most when the blower and coil have visible buildup, when the system has been running with a cheap filter for a long time, or when a home has had pest activity or water intrusion that left residue inside the ductwork. Duct Cleaning Kent inspects the air handler connection points before cleaning, then seals any gaps we find so conditioned air doesn’t leak into crawlspaces or wall cavities. A typical HVAC duct cleaning in Kent runs $400 to $800; the written estimate sets the final price.
Air Handler and Plenum Access
Getting the brush into the plenum is where a lot of cleaning jobs fall short. We open the right access points so the whole supply side can actually be reached. That access also lets us check for disconnected joints.
Static Pressure and Airflow Checks
Before and after cleaning, we look at how the system is moving air. A duct system with crushed or disconnected runs will read high on static pressure and low on delivery to the far rooms. That tells us whether cleaning alone will solve the problem or whether repair is needed.
Vent Cleaning
Vent Cleaning covers the visible and reachable end of the system: floor and wall registers, ceiling diffusers, and the boots behind them. If your registers have dark streaks, visible dust matting, or the air coming out carries a smell, they need attention. This is also the service that makes sense for a homeowner who isn’t ready to commit to a full-system cleaning but wants the obvious buildup handled. Duct Cleaning Kent pulls each register, cleans it, brushes the boot, and vacuums the run end before reseating everything. Typical vent cleaning in Kent runs $150 to $300 depending on how many registers are involved; the written estimate sets the final price.
Register and Diffuser Cleaning
Metal grilles and plastic diffusers collect dust in the vanes, and a rag doesn’t reach it. We remove and clean each one properly, then check that the damper still moves freely. It’s a small part of the job, but it’s the part you see every day.
Return-Air Path Focus
Return registers pull air back to the system, so they often hold the heaviest buildup in the house. Cleaning the return side matters at least as much as the supply side, and a lot of quick jobs skip it. We don’t.
Ductwork Cleaning
Ductwork Cleaning means working the full length of the distribution system, from trunk to terminal, including flexible runs inside walls and ceilings. It’s the right call when you’ve had a remodel with drywall dust, when a home has sat vacant, or when you’re dealing with rodent or pest evidence in the ducting. Duct Cleaning Kent uses rotary brushes sized for both rigid and flexible duct, plus a Nikro vacuum with enough pull to move debris the length of a long run instead of just stirring it up. Typical ductwork cleaning in Kent runs $350 to $750 for a single-family home; the written estimate sets the final price.
Flexible and Rigid Run Handling
Flexible duct is easy to damage if someone runs the wrong brush or pulls too hard. We size the brush to the run, keep the liner intact, and check for tears as we go. Rigid metal duct gets a different approach entirely.
Wye and Branch Fitting Access
The wye fittings where a trunk splits into branches are where debris collects first. Getting the brush through those junctions takes the right tools and the right amount of patience. It’s also where we spot disconnected branches that cleaning alone won’t fix.
Air Duct Inspection
Air Duct Inspection is a look inside the system before anyone quotes a cleaning: camera work inside runs, visual checks at registers and the air handler, and airflow testing to confirm what the ducts are actually doing. You want an inspection when a home changes hands, after a renovation, when you’ve had pest activity, or when a previous cleaning left no photos and no proof. Duct Cleaning Kent provides before-and-after photos of your own ducts so you can see exactly what changed. A standard inspection runs $100 to $200 and can be folded into a cleaning estimate; the written estimate sets the final price.
Camera Inspection of Duct Interiors
A camera down the run shows buildup, moisture, pest debris, and collapsed flex, none of which you can judge from the register. It’s the difference between quoting a cleaning and quoting a fix. We show you what we find.
Airflow and Leakage Findings
Low flow to the far bedroom is often a disconnected joint, not a dirty filter. Inspection catches those before you book work that won’t solve the problem. Leakage reduction and repair are where duct inspection turns into real comfort gains.
Residential Air Duct Cleaning
Residential Air Duct Cleaning is built around a lived-in house: pets, kids, carpet, and a system that’s been running on the same schedule for years. It matters when allergies flare indoors, when dust reappears within a day of cleaning, when a furnace or AC change left openings in the duct system, or when a family just moved in and wants a known starting point. Duct Cleaning Kent seals off work areas, runs negative air with an Abatement Technologies scrubber while we clean, and puts registers back exactly where they were. If you’ve been putting this off, our Duct Cleaning Kent hub lays out what’s involved. Typical residential air duct cleaning in Kent runs $350 to $700 depending on home size and duct layout; the written estimate sets the final price.
Pets, Allergies and Indoor Air Quality
Pet dander and dust mite debris settle in the duct lining and get blown back out every time the system runs. Homes with allergy-sensitive occupants see the biggest difference from cleaning followed by proper filtration. Whole-home filtration from Honeywell or Aprilaire is worth discussing at the same time.
Renovation and Move-In Cleaning
Drywall dust is fine enough to travel through the whole system and settle back out for weeks. Cleaning after a remodel or before move-in avoids living with that for a year. It’s also the cheapest time to catch anything a previous owner left behind, which is why we handle air duct cleaning as a defined whole-system job.
Commercial Air Duct Cleaning
Commercial Air Duct Cleaning covers light-commercial spaces: small offices, retail units, clinics, and multi-tenant buildings where a rooftop or split system feeds several zones. It’s needed when duct interiors show buildup that affects air quality for occupants, when a tenant changes and the space needs a documented baseline, or when HVAC efficiency has started to slip for no obvious reason. Duct Cleaning Kent works around business operations and schedules the work to fit the space, using the same equipment as residential work with room for larger trunks and longer runs. Typical light-commercial cleaning in Kent runs $700 to $1,800 depending on square footage and duct type; the written estimate sets the final price.
Light-Commercial Fit-Outs and Turnovers
A new tenant moving into an existing space wants a clean duct system on day one, not a list of problems. We can document the starting condition with photos so the landlord and tenant both have a record. That documentation also makes future maintenance decisions simpler.
Multi-Zone and RTU Systems
Rooftop units and multi-zone setups have longer trunks and more joints than a house does. Those long runs need equipment with real pulling power to clean properly, which is where professional-grade tools make a difference. We adjust the approach per system rather than applying one process everywhere.
Brands We Service
We work with professional Rotobrush equipment, and knowing the machine matters as much as owning it: brush size, rotation speed, and run pressure all change the result. The same applies to Nikro collection units, where airflow capacity determines whether debris leaves the duct or simply moves down the run. Familiarity with the hardware is what separates a real cleaning from a pass with a shop vac.
On the filtration side, we’re familiar with Honeywell and Aprilaire whole-home systems and how they interact with duct airflow and filter loading. Better air starts inside the system, not just at the filter, and knowing how the whole arrangement works helps us advise on it. Whether you have an Abatement Technologies scrubber in the plan or just a Honeywell filter cabinet, whether you have Rotobrush-friendly duct or any other make, we can help.
See the difference
Before
After
Before
After
Before
AfterSigns You Need a Pro Right Now
- Dust returns within a day of cleaning. When surfaces dust up fast after you’ve wiped them down, the source is usually the duct system blowing particles back into the room. That’s a sign the buildup has reached a level the filter can’t handle.
- Musty or stale smell when the HVAC runs. Odor that arrives with the air cycle points to organic buildup or moisture inside the ducts. Left alone, that can spread through the whole house.
- Visible dust streaks at the registers. Dark trails around grilles and diffusers mean debris is escaping at the edges. It also means the run behind the register is loaded.
- Uneven airflow room to room. If the far bedroom is always weak, pressure loss from buildup or a disconnected joint is a likely cause. An inspection sorts that before a cleaning does.
- Recent renovation, move-in, or pest activity. Any of these leaves debris in the duct system that a filter can’t catch. Cleaning and inspection give you a known starting point instead of guesswork.
Our Process, Step by Step
- 1
Inspection and camera check. We open access points, run a camera down representative runs, and test airflow. You see what we see before any work is quoted, and the written estimate is built from that.
- 2
Negative-air setup. Before a brush goes in, an Abatement Technologies scrubber and negative-air arrangement go up to keep particulate out of your living space. This is the step most cheap jobs skip, and it’s the one that protects your indoor air during the work.
- 3
Rotary-brush cleaning of each run. Rotobrush rotary brushes work each supply and return run, sized to the duct type. A Nikro vacuum pulls loosened debris into a collection unit while we work.
- 4
Register, boot, and plenum cleaning. Registers come off and get cleaned, boots get brushed, and the plenum gets accessed properly. Nothing visible gets left dirty.
- 5
Before-and-after photos and seal-up. We record your ducts on camera before and after, hand you the photos, and seal any joints we opened. If we found a disconnected or crushed run, we quote repair separately, and we can do that work too.
How Much Does Air Duct Cleaning Cost in Kent?
Air duct cleaning in Kent typically runs $350 to $700 for a standard single-family home, with larger homes, complex duct layouts, or heavy buildup landing in the $700 to $1,000 range. A single-zone light-commercial space generally falls around $700 to $1,800. Those are typical estimates, not quotes; the written estimate you get after inspection sets the final price.
What moves the number: how many supply and return runs there are, how accessible the ducting is, whether flex or rigid duct is involved, and whether repair is needed for disconnected, torn, or crushed runs. A home with a finished basement and long flex runs is a different job from a single-story with short supply branches. If we find a problem during inspection that cleaning won’t fix, we tell you before any work starts.
How to avoid overpaying: ask for a whole-system price rather than a per-vent rate, ask whether negative air and a scrubber are part of the job, and ask to see before-and-after photos afterward. If a quote is far below the range above, ask what’s excluded. It’s usually the scrubber, the return side, or the register removal. A free estimate from Duct Cleaning Kent walks the whole system and gives you one price per system, agreed before work starts. Call (866) 761-6504 to book it.
Our Service Area Near Kent
We work across Kent and the surrounding communities, including Covington, Auburn, SeaTac, Tukwila, Des Moines, Normandy Park, Lakeland North, Lake Morton-Berrydale, and Bryn Mawr-Skyway. Scheduling is dispatched Sunday through Friday, 7am to 7pm, and most nearby neighborhoods fall into a standard appointment window. For the surrounding area we also handle air duct cleaning for homes with the same duct layouts and the same common problems. Call (866) 761-6504 and we’ll confirm the next available opening for your address.
Serving Kent, WA – Our Local Coverage Area
We serve Kent and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions About Air Duct Cleaning in Kent
Air duct cleaning is the mechanical removal of dust, debris, and biological buildup from the supply and return duct system, including registers, boots, and the plenum. It uses rotary brushes and high-capacity vacuum equipment, not just a shop vac at the registers. In Kent homes, the most common finding is heavy buildup in the return trunk and at the wye fittings. Call (866) 761-6504 for an exact quote, and estimates are free.
A standard single-family home typically takes two to four hours, depending on how many runs there are and how accessible the ducting is. Homes with long flex runs or multiple zones take longer. We give you a time window when we book and try to hit it. Call (866) 761-6504 for an exact quote.
Most homes fall between $350 and $700, with larger or more complex systems running higher. The written estimate after inspection sets the final price, so there’s no surprise invoice when the technician is on site. It’s one flat price per system, not a per-vent rate. Call (866) 761-6504 for an exact quote, and estimates are free.
Yes. Rotobrush rotary-brush systems and Nikro collection equipment are what we use on the vast majority of jobs. We also work with Abatement Technologies air scrubbers to control particulate during cleaning. If you have Honeywell or Aprilaire filtration in the system, we check how it interacts with the ductwork as part of the cleaning. Call (866) 761-6504 for an exact quote.
Same-day appointments are often possible in Kent when the schedule allows. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening. Call (866) 761-6504 to check availability.
Work is backed by a satisfaction guarantee: if something isn’t right, we come back. Because exact warranty terms weren’t confirmed, we’d rather give you the details in writing on your estimate than promise something vague over the phone. The written estimate spells out exactly what’s covered. Call (866) 761-6504 for details.
Clear access to the furnace, the air handler, and each register, and move pets to a room we aren’t working in. You don’t need to remove furniture from every room, just leave us a path. Book air duct cleaning by calling (866) 761-6504, and we’ll walk you through the rest.
Schedule Your Air Duct Cleaning Service in Kent Today
If your Kent home needs its ducts cleaned, repaired, or simply inspected, call Duct Cleaning Kent at (866) 761-6504 for a free estimate. One flat price per system, agreed before work starts, plus before-and-after photos of your own ducts. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. If a duct problem has been waiting, this is the week to get it looked at.
Written by the team at Duct Cleaning Kent.